Direct RT-qPCR ProbesKit

د.إ 3,548.10
32 people are viewing this right now
1 in stock
Free Shipping & Returns:
On all orders over د.إ 400.00
PCR-518S

Description

ForĀ in vitroĀ use only!

Shipping:Ā shipped on blue ice

Storage Conditions:Ā store at -20 Ā°C
avoid freeze/thaw cycles
stable at 4 Ā°C for up to 4 weeks

Shelf Life:Ā 12 months

Form:Ā liquid

Description:
Direct RT-qPCR ProbesKit is designed for quantitative real-time analysis of target RNA directly from whole blood, swabs and animal- or plant tissue without the requirement of any prior RNA purification steps. The kit is recommended for use with Dual Labeled Fluorescent Probes,
e.g. TaqManĀ®, Molecular Beacons or FRET probes but can also be used without fluorescent probes in standard PCR assays. The kit contains an enzyme mixture including a genetically engineered reverse transcriptase and an antibody-inhibited Taq polymerase. The 2x conc. reaction mix contains ultrapure dNTPs and an unique buffer system optimized to resist various PCR inhibitors in unpurified sample material.

The kit ensures fast and easy preparation with a minimum of pipetting steps and is highly recommended for:

  • direct detection of RNA viral patogens in various tissues
  • direct amplification of target RNA from sample materials
  • point-of-care diagnosis

 

Content:
Direct Enzyme Mix (red cap)
Mix of engeneered reverse transcriptase, antibody-inhibited hot start polymerase and RNase inhibitor in storage buffer with 50 % glycerol (v/v)

Direct Reaction Mix (green cap)
2x conc. buffer system containing dNTPs

Extraction Buffer (yellow cap)
10x conc.

PBS (phosphate buffered saline) (blue cap)
10x conc.

PCR-grade Water (white cap)

Sample preparation
1. Swab Samples

  • Place the swab brush into a 1.5 ml microcentrifuge tube containing 270 Ī¼l PCR-grade Water and 30 Ī¼l PBS, 10x conc. (phosphate buffered saline).
  • Rotate the brush 5-10 times.
  • Squeeze the brush and remove it from the tube.
  • Centrifuge at 12,000 g for 3 min at room temperature.
  • Discard the supernatant.
  • Add 90 Ī¼l PCR-grade Water and 10 Ī¼l Extraction Buffer to the harvested sample.
  • Briefly mix the sample by vortexing and make sure that the sample is soaked with Extraction Buffer.
  • Incubate for 3 min at room temperature for tissue lysis and RNA releasing.
  • Centrifuge briefly and transfer 1-5 Ī¼l of the supernatant to the RT-PCR assay.

2. Animal or Plant Tissue

  • Prepare a small piece from animal or plant tissue not exceeding 6 mm in diameter.
  • Crack plant seeds to less than 1 mm in diameter using a BeadBeater, TissueLyser or small hammer.
  • Add Extraction Buffer to the tissue sample as following:
Sample size (diameter) 1-2 mm 3-4 mm 5-6 mm
PCR-grade Water 45 Ī¼l 90 Ī¼l 135 Ī¼l
Extraction Buffer 5 Ī¼l 10 Ī¼l 15 Ī¼l

 

 

  • Mix briefly by tapping or vortexing and make sure that the sample is soaked with Extraction Buffer.
  • Incubate for 3 min at room temperature for tissue lysis and RNA releasing.
  • Centrifuge briefly and transfer 1-5 Ī¼l of the supernatant to the RT-PCR assay.

Preparation of the RT-PCR Assay
Add the following components to a nuclease-free microtube. Pipett on ice and mix the components by pipetting gently up and down.

component stock conc. final conc. 20 Ī¼l assay 50 Ī¼l assay
Direct Reaction Mix 2x 1x 10 Ī¼l 25 Ī¼l
Sample 1-2 Ī¼l 1-5 Ī¼l
Forward Primer 10 Ī¼M 400 nM 0.8 Ī¼l 2 Ī¼l
Reverse Primer 10 Ī¼M 400 nM 0.8 Ī¼l 2 Ī¼l
Dual Labeled Probe 10 Ī¼M 200 nM 0.4 Ī¼l 1 Ī¼l
Direct Enzyme Mix1) 25x 1x 0.8 Ī¼l 2 Ī¼l
PCR-grade water fill up to
20 Ī¼l
fill up to
50 Ī¼l

1)Ā Direct Enzyme Mix already contains RNase inhibitor that is recommended and may be essential when working with low amounts of starting RNA.

 

Reverse transcription and thermal cycling:
Place the vials into a real-time PCR cycler and start the following program.

Reverse
transcription
50 Ā°C 30 min 1x
Initial
denaturation
95 Ā°C 5 min 1x
Denaturation 95 Ā°C 15 sec 35-45x
Annealing and elongation 60-65 Ā°CĀ 2) 1 minĀ 3) 35-45x

 

 

If using a standard PCR cycler combined with gel – based DNA analysis the following cycling protocol is recommended:

Reverse
transcription
50 Ā°C 30 min 1x
Initial
denaturation
95 Ā°C 5 min 1x
Denaturation 95 Ā°C 15 sec 35-45x
Annealing2) 55-65 Ā°C 30 sec 35-45x
Elongation3) 72 Ā°C 1 min/kb 35-45x
Final
elongation
72 Ā°C 5 min 1x

 

 

2)Ā The annealing temperature depends on the melting temperature of the primers.
3)Ā The elongation time depends on the length of the amplicon. A time of 1 min for a fragment of 1,000 bp is recommended.

For optimal specificity and amplification an individual optimization of the recommended parameters may be necessary.

Rating & Review

Based on 0 Reviews

There are no reviews yet.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Add to cart
Click outside to hide the comparison bar
Compare
0
1
×

Hello!

Click one of our contacts below to chat on WhatsApp

×