Cole-Parmer® Stuart MP-100 Analogue Melting Point Apparatus 230 VAC
د.إ 6,728.00
27 people are viewing this right now
Available on backorder
Description
About the brand
Reviews (0)
Questions
Description
Integral LED illumination and magnifying lens make viewing easy.
- Simple to use – place sample in capillary tube, set heating rate and watch for melt
- Test and view three samples at the same time
- Heat up to 20 °C/min close to melt temperature then set to slower heating rate of 1° to 10 °C/min
- Read temperature with mercury-free blue-spirit-filled thermometer
Take melting point measurements of up to three samples at once for greater efficiency. Easy-to-follow instructions are printed directly on the unit. Place your sample in a capillary tube and insert it into the aluminium block. Manually set the heating rate between 1 and 20 °C per minute, up to a maximum of 250 °C. Lowering the heating rate as you near the expected melting point temperature will increase the accuracy of the reading. Observe the sample through the magnifying lens until the melt occurs and read the melt temperature from the thermometer.
621-0036
SPECIFICATIONS
| Display | LED |
| Heating rate | 1…20 °C per minute (variable) |
| Temperature | 50…250 °C |
| Temperature sensor | Glass Thermometer |
| Power supply | 230 VAC, 50/60 Hz |
| W×D×H | 370×140×110 mm |
VWR
There are no question found.
Related products
EDTA (ethylenediamine tetraacetic acid) free acid, ultrapure, 500 G
د.إ 290.10
Available on backorder
Rating & Review
There are no reviews yet.